型号 CK-N特性及应用： CK-N系列为不含油封及无轴承支撑的楔块式单向离合器，适用于低运转速度。 安装时，螺栓与摆杆槽孔的间隙为槽孔的1％宽度，摆杆与离合器在安装后绝不可有内应力存在（安装时螺栓不可将扭力臂轴向锁住，径向也要留有间隙，使得没有弯曲应力施加于轴承及摆杆上）。 CK-N系列主要应用于包装、印刷设备上的防止逆转，定位给料；可在最小的空间内提供较大的扭矩。 Description: Type CK-N is sprag type one-way clutch integrate without supporting bearing and oil seal, and is suitable to application at low running speed. A blt, secured to a fixed part of the machine anf passing through the slot in the torque arm. Provides the rotating stop. Radial clearance on this bolt should be equal to 1％ of the solt with. The torque arm and the bearing must not be prestressed. Primarily used as a backstop or indexing clutch in packing and printing. This type provides a high torque capacity with a minimum space reuirement. 安装参考范例 Mounting example 型号 CK-N TYPE
欢迎访问川代轴承机械下属网站：
川代机械轴承网
