B208轴承尺寸规格 |
| 200 SERIES CAM CLUTCH
MODELS B203 TO B214
Shaft-Mounted Type
Model
Shaft Outer
Race
Max.
Torque
(N·m)
Max.
Indexing
(cycle/min.)
A (+0 to )
–0.06 C ( ) +0 to
–0.025
B
Shaft Dia.
Keyway
Use with JIS
Bearing
Number
Weight
(kg)
Nominal
Overrunning
Drag
(N·m)
Max.
Overrunning
(r/min)
B 203
B 204
B 205
B 206
B 207
B 208
B 209
B 210
B 211
B 212
B 213
B 214
39.2
58.8
98
235
372
549
549
784
784
1,230
1,230
1,390
0.098
0.098
0.196
0.196
0.196
0.196
0.196
0.294
0.294
0.294
0.294
0.392
2,400
2,400
1,800
1,800
1,800
1,800
1,800
1,200
1,200
1,200
1,200
1,000
500
500
400
350
300
200
200
200
200
180
180
180
150
150
150
150
150
150
150
150
150
150
150
150
25.0
25.0
25.0
28.0
28.0
32.0
32.0
32.0
32.0
42.0
42.0
42.0
40
47
52
62
72
80
85
90
100
110
120
125
–0.014
–0.039
–0.014
–0.039
–0.017
–0.042
–0.017
–0.042
–0.017
–0.042
–0.017
–0.042
–0.020
–0.045
–0.020
–0.045
–0.020
–0.050
–0.020
–0.050
–0.020
–0.050
–0.024
–0.060
16.510
18.796
23.622
32.766
42.088
46.761
46.761
56.109
56.109
70.029
70.029
79.356
4 × 2.5
5 × 3
5 × 3
7 × 4
7 × 4
10 × 4.5
10 × 4.5
10 × 4.5
10 × 4.5
10 × 4.5
10 × 4.5
12 × 4.5
0.23
0.34
0.45
0.68
0.80
0.91
0.95
1.00
1.40
1.80
2.30
2.40
6203
6204
6205
6206
6207
6208
6209
6210
6211
6212
6213
6214
Dimensions in mm
Note: Stronger spring type “B---SS” is availabe. when an inner race is needed, order “B---IR”.
Dimensions and Capacities
Installation and Usage
1. 200 Series Cam Clutch is shaft
mounted, so the shaft on which
the clutch is mounted must be
hardened to Rc 56-60 and 1.5 mm
case depth after grinding. Grind to
1.5S (16micro-inch) finish. The
taper of this shaft should not
exceed 0.01 mm per 50mm.
2. For installation of the clutch,
mount the clutch with bearings
at both sides or on one side in
order to obtain concentricity
between the shaft and the clutch
outer race and to take up radial
or thrust loads which may work
on the outer race or the shaft.
See the installation example.
3. The clutch should be mounted
on the shaft by rotating it in the
direction marked by the arrow
shown on the clutch plate. Do
not apply shock to the clutch by
hammering.
4. The clutches have the same
outside diameters as the
bearings shown in the table
above. Bore tolerance of the
housing in which the clutch is
assembled should be within the
range shown in the table below.
5. For indexing, oil lubrication is
recommended.
6. Concentricity of the housing
bore and shaft should be within
0.05 mm.
7. Key profile should be in
accordance with JIS B1301-1959.
Typical installation drawing
• See “information for Selection” on page 73.
• See “Lubrication and Maintenance” on
page 75.
q Inner race
w Cam
e Spring
r Side plate
Model Tolerance of
housing bore (mm)
B 203, B 204
B 205, B 206, B 207, B 208
B 210, B 211, B 212, B 213
B 214
+0 to +0.025
+0 to +0.030
+0 to +0.035
+0 to +0.040 |
近期推荐轴承型号B208,
,
MZ30G22,
BREU35 (K) E2+E7,
TKP0450W78R95-U,
TKP0350-MW-ST,
TKP0450-MW-ST,
TKP0680-EHS51.5,
TKM0650W194R75,
TKM0950W482R380,
TKP0625W150R150H,
TKP0900-LS-IU,
以上为我司部分轴承型号，如需查找其他型号，可登陆我们的现货中心栏目或致电021-52797858转8008询价,进行详细查询，谢谢！
|
| B208产品详细图片： |
 |
| TSUBAKI轴承品牌介绍： |
| tsubaki公司主导产品有：tsubaki椿本离合器、tsubaki单向轴承、tsubaki直线运动机构、tsubaki连轴器、tsubaki链条、tsubaki过负荷继电器、tsubaki超越离合器、tsubaki电缆保护槽等。日本椿本tsubaki是传动产品制造厂商。 |
上海川代轴承机械有限公司专业销售TSUBAKI轴承 B208轴承,TSUBAKI轴承品牌供应商,我们为您提供B208的具体的规格参数及报价，本公司同时销售包括TSUBAKI轴承品牌在内的多种进口轴承，包括深沟球轴承、自动调心球轴承、角接触球轴承、圆柱滚子轴承、滚针轴承、球面滚子轴承、推力轴承、Y-轴承、滚轮轴承，直线轴承，滑动轴承，轴承箱及各种精密机械部件等产品，目前公司拥有现货库存、快捷的物流体系、能在较短的时间内为用户解决轴承的配套供应和提供个性化服务。
欢迎垂询TSUBAKI轴承 B208轴承价格和库存信息。咨询热线：021-52797858转8008询价 |
欢迎访问川代轴承机械下属网站：
川代机械轴承网
其他相关信息：